Other Connections; Connecting Auxiliary Components; Connecting An Analog Audio Component; Listening To An External Audio Source - Pioneer HTS-570 Mode D'emploi

Other connections

Chapter 8
Other connections
Important
• When connecting this system or changing
connections, be sure to switch power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cord to the wall socket.

Connecting auxiliary components

The receiver subwoofer has several digital inputs for
digital playback components, such as DVD, CD and MD
players.
AUDIO INPUT
DIGITAL
DVD DTV
(COAXIAL) (OPTICAL)
MCACC
SETUP MIC
CONTROL IN
SPEAKERS
SYSTEM CONNECTOR CONTROL
OUT R L
SUBWOOFER SURROUND
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
R L
AC IN CENTER FRONT
DVD player, etc.
• Connect the digital output jack on your DVD
player, etc. to one of the DIGITAL input jacks on the
receiver subwoofer.
Use a commercially available optical cable or supplied
coaxial cable to make this connection.

Connecting an analog audio component

You can use the AUX input jacks to connect an analog
audio component, such as a tape player. See Using this
system for TV audio on page 14 for connection details
(this explains connecting the audio output from your TV,
but any analog audio component can be connected).

Listening to an external audio source

You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include your TV. See also Connecting auxiliary
components above.
PC/GAME
(OPTICAL)
FM UNBAL 75 AM LOOP ANTENNA
AUDIO INPUT
DIGITAL ANALOG
DVD DTV PC/GAME
AUX
(COAXIAL) (OPTICAL) (OPTICAL)
L
R
To digital audio or
output (coaxial)
To digital audio
output (optical)
STANDBY/ON STANDBY/ON
VOLUME
DVD DVD DTV DTV
1 If the system isn't already on, press
ON to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2 Select DVD, DTV, PC/GAME or AUX to select the
source for playback.
These buttons correspond with the input jacks on the
receiver subwoofer.
3 If necessary, start playback of the external source.

Connecting external antennas

For an external AM antenna, use 15 ft. to 18 ft. (5 to 6
meters) of vinyl-insulated wire and set up either indoors
or outdoors. Leave the loop antenna connected.
For an external FM antenna, use a PAL connector to hook
up an external FM antenna.
external FM antenna
Indoor antenna
(vinyl-coated Wire)
15 ft. to 18 ft.
(5 m to 6 m)
ANTENNA
SYSTEM CONNECTOR
CONTROL
FM UNBAL 75 AM LOOP ANTENNA
OUT
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
PAL connector
AC IN
MUTE
PC/GAME PC/GAME AUX AUX
TUNER
STANDBY/
external AM antenna
Outdoor antenna
Loop antenna
FM UNBAL 75 AM LOOP ANTENNA
MCACC
AUDIO INPUT
SETUP MIC CONTROL IN
DIGITAL ANALOG
SPEAKERS DVD DTV PC/GAME
AUX
R L (COAXIAL) (OPTICAL) (OPTICAL)
SUBWOOFER SURROUND
L
R
R L
CENTER FRONT
08
27
En