Listening With Acoustic Calibration Eq; Enhancing Dialogue; Using Quiet And Midnight Listening Modes; Adjusting The Bass And Treble - Pioneer HTS-570 Mode D'emploi

05 Listening to your system

Listening with Acoustic Calibration EQ

You can listen to sources using the Acoustic Calibration
EQ set in Using the Auto MCACC setup for optimal
surround sound on page 18.
1 Press SOUND .
2 Use the
MCACC EQ then press ENTER .
3 Use the
EQ ON or EQ OFF then press ENTER to confirm.
• On the EQ OFF setting, equalization is set to off and
speaker settings (channel delay and channel level)
remains as it is set.
• Acoustic Calibration EQ is set to on automatically
after Auto MCACC setup is used.

Enhancing dialogue

The Dialogue Enhancement feature is designed to make
the dialogue stand out from other background sounds in
a TV or movie sound track.
1 Press SOUND.
2 Use the
DIALOGUE then press ENTER.
3 Use the
the amount dialogue enhancement then press
ENTER to confirm.
Select between OFF, MID or MAX.
22
En
SLEEP
ENTER CLEAR
SR
SETUP
TUNE TUNE
ST ST ST ST
ENTER ENTER
TEST
SOUND SOUND
TONE
TUNE TUNE
SOUND
RETRIEVER
SURROUND ADVANCED F.S.SURR MCACC
(cursor left/right) buttons to select
(cursor up/down) buttons to switch
(cursor left/right) buttons to select
(cursor up/down) buttons to select
Using Quiet and Midnight listening
modes
The Quiet listening feature reduces excessive bass or
treble in a sound source.
The Midnight listening feature allows you to hear
effective surround sound of movies at low volume levels.
1 Press SOUND.
2 Use the (cursor left/right) buttons to select
TONE then press ENTER.
3 Use the (cursor up/down) buttons to select
QUIET or MIDNIGHT then press ENTER to confirm.
• To cancel the Quiet or Midnight listening modes,
select BASS/TRE.

Adjusting the bass and treble

Use the bass and treble controls to adjust the overall
tone.
1 Press SOUND.
2 Use the (cursor left/right) buttons to select
TONE then press ENTER.
3 Use the (cursor up/down) buttons to select
BASS/TRE then press ENTER.
• Selecting BASS/TRE cancels the Quiet and Midnight
listening modes. These modes cannot be used at the
same time.
4 Use the (cursor left/right) buttons to select
BASS or TREBLE; use the
buttons to adjust the sound then press ENTER to
confirm.

Boosting the bass level

There are two bass modes you can use to enhance the
bass in a source.
1 Press SOUND .
2 Use the (cursor left/right) buttons to select
BASSMODE then press ENTER .
3 Use the (cursor up/down) buttons to select the
sound then press ENTER to confirm.
Select between OFF, MUSIC or CINEMA.
(cursor up/down)