5-Gallon Extension With Suction Tube - Homeright C800804 Mode D'emploi

8
8. Depress the paint/clean switch
to the paint setting.
12
12. Upon completion, turn the unit
off by depressing the button on
the handle and unplug the unit.

5-Gallon Extension with Suction Tube

Unit Hose
Adapter Fitting
Extension Tube
1. To pump paint from a 5-gallon container, lubricate the end of the
extension tube with petroleum jelly and place the adapter fitting into
extension tube.
2. Fit the adapter fitting into the hose from the unit and hook adapter fitting
onto side of container. Ensure that the extension tube is immersed into the
paint.
• NOTE: Do not twist or crimp the paint flow hose. Damage may occur.
Should hose become worn, replace it with a new hose. If the pump unit
fails, consult TROUBLESHOOTING.
C820429A_MAN_Pro Electric.indd 7
9
9. Depress the button on the roller
handle to bleed out air in the
hose and feed paint to roller.
13
13. If unusual motor noises are
detected during operations,
turn off the unit, unplug
the unit and consult
TROUBLESHOOTING.
Lubricate
PRO ELECTRIC PAINT ROLLER (C800804)
Painting
10
10. Move the roller on the surface
until the paint is equally
distributed on the roller.
Once the roller is saturated
with paint, adjust the speed
dial to reduce the amount
of paint flow or depress the
button on the handle to shut
off unit until more paint is
needed on the roller.
7
11
11. Place the roller in the
roller keeper for temporary
assistance.
For overnight storage, place
the roller in the roller holder
with the lid attached.
CAUTION: If roller filled with
paint is unattended paint may
drip out of the roller.
ENGLISH
5/12/10 1:37 PM