Publicité
Les langues disponibles
Les langues disponibles
3-OPERATING YOUR WINE COOLER
The wine cooler should be placed where the ambient temperature is between 15 to 25 ºC. If the ambient
temperature is above or below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The
zone temperature may have a difference of +/- 5°F (+/- 3ºC) from setting depending on loading
and ambient conditions.
DUAL ZONE CONTROL PANEL
ON/OFF POWER
To turn ON/OFF the appliance, press the ON/OFF button
SETTING THE TEMPERATURE CONTROL
The temperature preset at the factory is 50° F (10° C) . In order to extend the compressor life,
•
please restart wine cooler after 3 minutes.
Set the desired cooling temperature by pressing the button
•
your desired temperature. Each depression of the buttons will scroll through the available
temperature settings in increments of 1 degree.
This unit has the option to display temperatures in either Celsius or Fahrenheit. To change the
•
setting of the unit from "F" to "C" (or vice versa) press simultaneously the
for 3 seconds. First, make sure the unit is unlocked.
• You can turn the interior light on or off by pushing the
For sparkling wine the temperature should be set between 45°-47° F (7°-8 °C)
•
For white wine the temperature should be set between 48°-54° F (9°-12 °C)
•
For red wine the temperature should be set between 55°-65° F (13°-18 °C)
•
4/5/2011
.
"UP" or
button.
"DOWN" to set
and
button
13
Publicité
