Attaching The Suction Cups - SilverCrest SLS 2200 C2 Mode D'emploi

Attaching the suction cups

NOTE
► To make sure that the suction cups
must be completely free of dust, oil and grease.
Variant A
Variant A is suitable for attaching the device to a flat, level surface.
♦ Attach all four suction cups
as shown in "Figure A".
♦ Push the suction cups
♦ Now fasten the suction cups
openings.
Figure A
♦ You can now attach the device on a flat, level using the suction
cups .
SLS 2200 C2
hold firmly, the surface
to the underside of the device,
into the large holes.
by sliding them into the narrow
GB │ IE │
9 ■