Suction Function; Blowing Function - Euroflex IB 40 CLASSIC Notice D'utilisation

INSTRUCTIONS FOR USE IB 40 CLASSIC
Suction function and heating of board
The suction absorbs the superfluous steam, which is no longer used after the ironing
process. The suction helps hold the garment on the ironing surface and helps to dry the
garment. Clean ,dry clothes are obtained, ready to be placed straight in the wardrobe
without further airing. The heated ironing surface stays dry, and keeps the steam hot so
that it passes through the cover and board to be expelled without condensing.
Recommendation:
- Through the suction function, light fabrics (silk etc.) can be held in place on the
ironing board, preventing them from slipping.
- The suction function cools the fabric and "fixes" the results of the ironing,
guaranteeing for ex. perfect folds.
IB40 Classic RA Model - Suction only
This model has no blowing function
- For continuous suction set the selector switch on
position "I".
- With the switch in position "0" the suction function
is switched off.

Blowing function

The blowing allows you to iron without downward pressure on a cushion of air.
This makes ironing of delicate items, or difficult areas (trousers folds, pockets, seams,
difficult areas to reach), much easier and avoids the "false ceases" that seam
crushing can produce.
IB40 Classic RAS Model - Suction and Blowing
This model has the additional blowing function
- For continuous suction function set the selector
switch on position "I".
- For continuous blowing function set the selector
switch on position "II".
- With the switch in position "0" suction and
blowing functions are switched off.
Caution:
if you are ironing with steam, never set the selector switch on position "0".
Warning:
Do not rest the warm iron directly on the Iron storage shelf, always use
the iron-rest mat included.
15
Selector
switch
Selector switch