Publicité
Les langues disponibles
Les langues disponibles
Dry well before re-using. Caution! The blades inside of
the jug are very sharp.
l Never use aggressive cleaning agents.
Warning:
Do not to touch the sharp blade. When clean, please wipe by dishcloth, to avoid accidentally injure
Note:
1. Unit suitable for household only.
2. Overheat protection
In order to prolong the device's service life, an overheat protecting unit is installed. If the motor
runs too long or overloaded, the temperature reaches the warning value and the motor will stop
automatically. Pull out power supply plug and wait for the motor to cool (about 20 to 30 minutes),
then use again.
If you have any problem with this device, do not disassemble it by yourself. Always contact the
service department or after-sale service department.
3. Do not use for commerce. Otherwise the maintain service will invalid.
CLEANING
Cleaning the Blender Jug
1. Pour about 500ml of warm soapy water into the jug
and place the jug on the base.
2. Use the pulse mode to loosen any food particles and
free them from the blades.
• Remove the jug, pour away the water and rinse in
fresh running water. Repeat steps 1 and 2 with fresh
water.
• Alternatively the jug may be immersed in warm
soapy water and cleaned using a long handled
brush. Do not touch the blades when cleaning.
• Wash the lid and measuring cup separately in warm
soapy water, rinse and allow to dry.
.
Publicité
