Publicité
Les langues disponibles
Les langues disponibles
-
For optimal steam boost performance, it is recommended to press
the steam boost trigger at a 5 seconds interval.
Vertical steam
-
You can use the steam boost function when you hold the iron in
vertical position for removing creases from hanging clothes, curtains
etc. (Fig. 12)
Dry ironing
-
Set the steam control to
Safety auto-off function (specific types only)
-
The iron switches off automatically if the iron is not in use for
8 minutes. The light ring starts to slowly breath in blue to indicate
the safety auto-off mode is activated.
-
To let the iron heat up again, remove the iron (if the iron is on the
base) and put it back to the base.
Cleaning and maintenance
Cleaning
Set the steam control to
1
down. (Fig. 2)
Pour any remaining water out of the water tank.
2
Wipe flakes and any other deposits off the soleplate with a damp
3
cloth and a non-abrasive (liquid) cleaning agent.
Caution: To keep the soleplate smooth, avoid hard contact with metal
objects. Never use a scouring pad, vinegar or other chemicals to clean
the soleplate.
Note: Regularly rinse the water tank with tap water. Empty the water tank
after rinsing it.
to iron without steam. (Fig. 2)
, unplug the base and let the iron cool
ENGLISH
9
Publicité
