Philips EasySpeed Plus Cordless GC2078 Série Mode D'emploi page 10

ENGLISH
12
Problem
The iron leaks.
Flakes and
impurities come
out of the soleplate
during ironing.
Possible cause
You are using a
temperature of below
2 dots.
Cordless iron cools
down after a while. It
needs to be recharged.
You are using steam or
steam boost at a low
temperature.
You have used the
steam boost function
too often within a very
short period.
The water tank is
overfilled.
The door of filling
opening is not closed
properly.
You have not
performed Calc-Clean
function for some time.
The iron need to be
cleaned.
Solution
Consult Table 1
in Chapter "using
the appliance" for
temperature and steam
setting.
Put the iron back to its
base to heat up and dry
the soleplate.
Put the iron back to its
base to heat up and dry
the soleplate.
Consult Table 1 for use
of steam and steam
boost.
Put the iron back to its
base to heat up and dry
the soleplate. Use the
steam boost function
less frequently.
Do not fill the water
tank beyond the MAX
indication.
Make sure that the
door of filling opening is
closed properly.
Use the Calc-Clean
function (see chapter
'Cleaning and
maintenance', section
'Calc-Clean function').