Center Mount Hanger Adjustment - Zippie ZM-310 Mode D'emploi

Z I PP IE Z M- 310 Z I PP IE Z M- 310
L. CENTER MOUNT HANGER ADJUSTMENT
(ASAP Seating only)
1. Removing the assembly
a. Remove the four screws (A) and slide the footrest assembly out of the receiver.
2. Footplate Height Adjustment
a. Remove the six securing screws (B).
b. Move the footplate up or down to the desired height.
c. Re-install screws (B) through adjusted holes and tighten the hardware.
3. Calf pad Adjustment
a. Remove the two securing screws (C).
b. Move Calf Pads to desired height.
c. Re-install screws (C) through adjusted holes.
127899 Rev. A
57
58
59
57 58 59
32
XI. DEALER SERVICE & ADJUSTMENT
57
58
59