Power Supply Laser - THEIS SMART LEVEL HV Instructions De Service

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9. Power supply
As soon as the battery indicator blinks, the capacity
of the accumulator is exhausted and it has to be re-
charged immediately. If the indicator is ignored, the
instrument switches off automatically a short time lat-
er.
Recharging of the accumulator only with THEIS
standard-charger via charging socket at the battery
compartment of the laser level. The accu can also be
charged, if the compartment is separated from the la-
ser level. Turn the knop counter clockwise.
Overloading is not possible, if charging is not repeat-
ed successive several times.
If possible the battery should be charged at room
temperature. Charging under +5° C can cause the
damage of the battery.
Attention: Never operate charger in damp
rooms!
Please charge the instrument at least every 6
weeks, even it is not used!!!
Charging socket
Battery compartment
Knob
23

Publicité

Table des Matières
loading

Table des Matières