Philips HD986X Guide D'utilisation page 18

ENGLISH
20
Problem Possible cause
I see some peeling Some small spots can
off spots inside my appear inside the pan of
Airfryer. the Airfryer due to the
incidental touching or
scratching of the coating
(e.g. during cleaning with
harsh cleaning tools and/or
while inserting the basket).
White smoke comes You are cooking fatty
out of the appliance. ingredients and the
fat reducer is not put in the
pan.
The pan still contains
greasy residues from
previous use.
Breading or coating did
not adhere properly to the
food.
Marinade, liquid or meat
juices are splattering in the
rendered fat or grease
My display shows 5 This is an error code
dashes as illustrated
in the picture below.
Solution
You can prevent damage by lowering the
basket into the pan properly. If you insert
the basket at an angle, its side may knock
against the wall of the pan, causing small
pieces of coating to chip off. If this occurs,
please be informed that this is not harmful as
all materials used are food-safe.
Carefully pour off any excess oil or fat from
the pan, place the fat reducer in the pan and
then continue cooking. (Fig. 4)
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan,
basket and fat reducer thoroughly after every
use.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or
coating to food to ensure it sticks.
Pat food dry before placing it in the basket.
1. Unplug the appliance and let it rest for 5
minutes before plugging in again.
2. If your display still show the dashes please
call the Philips service hot line or contact
the Consumer Care Center in your country.