NGM WE MOVE miracle Guide Rapide page 25

Charging the battery: please charge the battery completely before starting to use the device.
Use the provided USB cable, connecting one end to the provided wall socket adaptor (placed
into a socket) and the other end to the USB connector placed on the upper side of the phone.
The phone can also be charged by connecting it to a PC USB port but in that case it will charge
more slowly. While the battery is charging, an animation on screen will show the charging
progress. Once charge is completed, the icon will be filled and the phone can be disconnected
from the grid.
Notification LED: when the phone is turned off, the red led will indicate the charging process.
It will turn green when the battery is fully charged. The LED will blink red when you have a
notification such as an incoming message or a missed call.
Warning: Do not connect the phone to a booting-up or running down PC to avoid voltage
jumps. In order to preserve the correct functioning of the device and in order not to
compromise warranty, the sole use of original NGM battery chargers and accessories are
recommended. Please charge the battery indoors, in a dry and favorable environment. It's
normal for the battery to get slightly warm during the charging process. The battery will reach
its full capacity when cycled several times.
Turn on, turn off and standby
Press and hold the on/off key to turn on the phone. Press and hold the same key and confirm
your intention to turn off the phone. A quick pressure of the on/off key sets the phone on
standby-mode (screen off) or allows you to go back to the standby screen (see below).
ENGLISH 25