aarke Carbonator II Manuel D'utilisation page 7

User guide
DEGREE OF CARBONATION
With the Aarke Sparkling water maker you can easily learn how to adjust the degree of
carbonation, or, how much bubbles you want. The level of carbonation depends on many
factors such as the temperature of the water and the amount of gas in the gas cylinder.
How would you like your soda water?
You will add more carbonation to the water by
repeating the carbonating process. The process
will consume less gas if you only lift the lever half-
ways (enough to quiet the buzzing sound but before
relieving the pressure from the bottle) between the
carbonation cycles.
KEEPING YOUR SPARKLING WATER MAKER BEAUTIFUL AND CLEAN
Polished steel version
This carbonator is made of polished stainless steel. Stainless steel gets its lustre from the chrome
and its stainless quality from the nickel. Adhering to the maintenance tips will ensure that
you enjoy (the look of) your Aarke Carbonator for a long time. To clean your carbonator we
recommend using a micro fibre cloth and water. If needed you could use some mild soap. Do not
use strong detergents or cleanser with abrasive substance.
Lacquered version
The lacquered Aarke Carbonators are made of polished stainless steel that have been
industrially painted in various colours and finishes. To clean your glossy lacquered Aarke
Carbonator we recommend using a micro fibre cloth and water. If needed you could use some
mild soap. To clean you matte lacquered Aarke Carbonator we recommend using a soft cloth
or sponge and water. If needed you could use some mild soap. Never use strong detergents or
cleanser with abrasive substance.
English
EN