R.G.V. FRESH QUALITY LED Manuel D'utilisation page 25

IV. Vacuum package in a Canister & Vacuum Bowl
1. Be careful to use proper canisters and covers suitable for vacuum
packaging, strong and resistant, in steel, plastic or tempered glass.
2. Be sure to have a proper canister attachment, for the covers and
valves used.
3. Fill canister leaving 4/5 cm free space from top.
4. Insert one end of the hose (11.) into the air intake (9.). Insert the
other end in the canister valve or specific canister attachment; this
attachment is specific for every kind of cover/canister, so it may be
bought as spare part.
5. Press the button "Vacuum" (7.) until setting vacuum pressure to "High";
the corresponding LED switches on.
6. Press switch (3.) "Canister" to start vacuum operation. Device will
automatically stop as the maximum vacuum level is obtained.
7. Immediately remove hose end (11.) and canister attachment; lock
canister valve (if necessary, depending on the kind of cover/canister
used). Don't delay this operation, to prevent air leakage inside the
canister.
EN
25