R.G.V. FRESH QUALITY LED Manuel D'utilisation page 22

EN
11. Canisters hose
(Flexible rubber hose with fittings for container):
Use this hose adaptor to connect with vacuum canister and machine for
vacuuming purpose. Canisters are not included in the packaging.
12. Welding bar gasket:
Place the bag to be sealed below this strip. Clean and dry or replace it
when distorted or broken.
13. Vacuum chamber gaskets:
Keep air away by forming vacuum chamber. Clean and dry or replace it
when it is distorted or broken.
14. Air intake:
Air intake connects with vacuum chamber and pump. Do not cover this
intake when placing bag for vacuum &Seal operations.
15. Liquid tank:
Position the open end of the bag inside the chamber, draws air out of
bag and catches any liquid overflow from the bag. Can be take out for
cleaning after use.
BE CAREFUL: PROTECTION IS GUARANTEED ONLY
FOR SMALL LIQUID QUANTITY OR HUMIDITY. BIG
QUANTITY COULD ANYWAY DAMAGE THE DEVICE.
16. Sealing bar:
Teflon-coated heating element which gets hot to seal the bag.
BE CAREFUL: THIS ITEM COULD BE VERY HOT AND
BURNING DURING FUNCTION.
17. Cutter
18. Cutter support
19. Compartment roll/bag for vacuum
20. LED bar
It lights up once the cover is closed with lowered handle.
It switches off after a few seconds when the cover is lifted.
22