Ayce SW-25 Manuel D'utilisation page 29

INSTALLATION
Open the package and take out the products, make sure all
components are included, IM, remote control, etc.
1. Install the fan according to below instructions.
Figure 1
(1) Fix the six wheels [12] in the base [11] (Figure 1).
(2) Disassemble the base nut[13] from body[9], put fan body [9]
through the hole of base [11], and fix them tight by base nut[13]
(Figure 2).
Figure 3
Figure 2
Figure 4
(3) Put motor set[7] into the hole of body[9], fasten the motor set [7]
with the fixation screw [8] (Figure 3).
(4) Disassemble the mountingnut[5] from motor set[7], put the rear
fan grill [6] on motor set [7], and align the 3 positioning point to
the holes on grill, finally fasten grill mounting nut [5]. (Figure 4).
Figure 5
(5) F ix the blade [4] on motor shaft and align slot on blade to pin on
motor shaft, then counterclockwise fasten blade cap [3]
(Figure 5).
(6) Assemble front fan grill [2] to the rear grill [6], Fix the grill with
the crew on grill buckle. (Figure 6).
56 57
Figure 6