Mounting material
A fully extracted awning has to withstand extreme
loads at its fastenings. Only use the included mount-
ing material.
Technical data
External dimensions
MODEL
10329931
2.84 m x 2.30 m
Fabric width
2.74 m
Fabric
Textilene 420 g/m
Total weight
15 kg
Suitable for
10178484
10329560
WARNING
To meet the wind resistance class mentioned in
the declaration of conformity, the installed awn-
ing needs to fulfil these requirements:
•
The awning is installed with the recommended
type and number of brackets.
•
The awning is installed under consideration of
the given fastening pull-out forces.
•
The instructions of the fastening manufacturer
have been respected during installation.
The combination of wall type and mounting mate-
rial used at your installation site might result in a
lower wind resistance class for your awning.
10329932
3.84 m x 2.30 m
3.74 m
Textilene 420 g/m
2
2
21 kg
6828262
1017843
10329557
10329559
ENGLISH
|
119