Garmin GLO GLONASS Manuel D'utilisation page 3

Pairing the Sensor
1
Hold to turn on the sensor�
2
Turn on the other device and enable
the Bluetooth component�
You can refer to the device's
documentation for specific instructions
about enabling Bluetooth wireless
technology�
3
Bring the sensor within 30 feet (10
meters) of the mobile device�
4
Using the mobile device, pair the
sensor with the mobile device�
The blue LED is solid blue when the
sensor is connected to the other device�
If the sensor has not established a
Bluetooth connection for several minutes,
it turns off automatically�
Bluetooth LeD
LeD Description
Slow flashing Searching for mobile devices
blue
Rapid flashing Pairing
blue
Solid blue Connected to mobile device
Status LeD
LeD
Slow flashing orange Charging
Solid orange
Orange off
Rapid flashing orange Low battery
Alternating orange
and green
Flashing green
Solid green
Acquiring Satellite Signals
1
Verify that the blue LED on the sensor
is solid blue, indicating a wireless
connection�
2
Place the sensor where it has a clear
view of the sky�
Acquiring satellite signals may take a
few minutes� The Status LED flashes
green while searching for satellites and
establishing your location� The Status LED
is solid green when it has established a fix
on your location�
Description
Battery charged,
power connected�
Battery charged,
power disconnected�
Faulty battery or
system error
Searching for GPS
satellites
GPS satellite fix
3