Installation; Hardware Installation - Belkin OmniView Manuel De L'utilisateur

P74238ea_F1DE101G-man.qxd 28-04-2003

Hardware Installation

Installing the RIPC into a Server Rack
The RIPC includes mounting brackets for installation in 19-inch racks.
1. Attach the included bracket to the top or bottom of the RIPC with the
provided Phillips screws.
2. Mount the RIPC to the rack.
Note: Mounting screws for the rack are not included. Please use the specified screws
from your rack's manufacturer.
*** Cautions and Warnings ***
Before attempting to connect anything to the RIPC or your computer(s),
please ensure that all your computer equipment and devices are powered off.
Belkin Corporation is not responsible for damage caused by your failure to do so.
09:33 Page 6

INSTALLATION

6
INSTALLATION
1. Power down your server or KVM Switch.
2. Connect your PS/2 type keyboard and mouse to the appropriate PS/2
"Console" ports.
Serial 02
power
Serial 01
reset
1 2 3 4 5 6 7 8 9 0 -
P [ ]
K L ;: '"
shift
3. Take the video cable that is attached to your VGA monitor and connect it to
the "Console" port.
console CPU/KVM
LAN
F9 F10 F11
num cap
lock lock pg up
= / -
= HOME PG UP PG DN
delete
7 8
CAPS ` 9
HELP
+
4 5 6
ESC OPT
return PC
1 2 3
^
clt
0
< + >
alt
7