Keyboard/Mouse Settings; Kvm Switches - Belkin OmniView Manuel De L'utilisateur

P74238ea_F1DE101G-man.qxd 28-04-2003
NETWORK SETTINGS MENU

Keyboard/Mouse Settings

The RIPC supports different keyboard and mouse models. The panel
shown in the Keyboard/Mouse Settings Menu is used to adjust settings
(see table below).
Keyboard/Mouse Options Table
Control Description
Targeted KVM Port Selects the KVM port to which the settings made below
will be applied. Choosing "Update" will display the
current values for this port and select it for alteration
of its settings.
Keyboard Model Selects the keyboard model used on the remote
host system.
Mouse Mode Automatic
synchronization process;
1: n
between the local and the remote pointer, so you can
move the mouse even if it's not entirely synchronous.
Reset Mouse/ This option will reset the RIPC's keyboard and
Keyboard Emulation mouse emulation for the host system. Use it if the
keyboard or mouse seem to react irrationally. It's just
like pulling out the keyboard and mouse connectors
and plugging them in again.
09:33 Page 34
uses the automatic mouse
enacts direct scaling of mouse movements
34
NETWORK SETTINGS MENU
Keyboard/Mouse Settings Menu

KVM Switches

It is possible to select the number of ports used by the connected KVM switch,
and you may assign each port a name. In order to provide KVM port switching
through the RIPC, key combinations have to be defined for the ports.
KVM Settings Menu
35