Dörr DSL-40 Notice D'utilisation page 10

02 | SAFETY HINTS FOR RECHARGEABLE BATTERIES
Only use high-quality batteries of popular brands. When inserting the battery please respect the correct polarity (+/-). Please remove
battery when device is not in use for a long period of time. Do not throw the batteries into fi re, do not short-circuit and do not disassem-
ble them. Never charge non-rechargeable batteries – risk of explosion! Remove leaking batteries from the device immediately. Risk
of battery acid burn! Clean the contacts before inserting fresh batteries. In case of contact with battery acid, rinse the a ected area
immediately with water and contact a doctor. Batteries can be dangerous to life if swallowed. Keep batteries away from small children
and pets. Do not dispose of batteries in household waste (see also capture "Disposal of Batteries/Accumulators").
03 | PRODUCT DESCRIPTION
With its' almost limitless variety of colours, you can achieve creative accents with the DÖRR DSL-40 RGB LED Strip Light. The colours,
the saturation, the brightness, as well as the colour temperature in the white light mode, are steplessly variable and create dynamic
e ects for product shootings or for indoor and outdoor shots.
RGB colours (red, green, blue) can be adjusted as desired
•
Colour temperature for white light adjustable from 3200 - 5500 K
•
Operation via supplied (replacement) NP-F750 Li-Ion battery (including battery charger) or via the supplied power adapter
•
Supplied with wrist strap, hook for hanging and hardcase
•
04 | NOMENCLATURE
›
04.1 DSL-40 RGB LIGHT
1 LED illuminated area
2 Battery slot
3 Battery contact pins
4 Socket for power adapter
5 LCD Display
6 Button H/S = hue and saturation
7 Button = brightness
Bri
8 Button Bat = battery capacity indicator
9 Button Tem = colour temperature
10 Main switch (rotary control)
11 Eyelet for wrist strap
12 ¼ inch tripod mount/mount for hook
13 Hook for hanging
14 Wrist strap
05 | FIRST COMMISSIONING
05.1 CHARGING THE LI-ION BATTERY
Before fi rst use of the DSL-40 RGB light, please fully charge the Li-Ion battery (21) with the supplied battery charger (15).
CAUTION
Only charge rechargeable Li-Ion batteries of the type NP-F750 with the supplied battery charger!
The charger is not suited to charge other battery types!
Insert the power cable (20) to the cable socket of battery charger (19) and connect with an electrical outlet. The LED charging indicator
(16) lights up green.
Place the Li-Ion battery (21) over the centre of the charging slot (18) and pay attention to the correct polarity (markings +/- on the bat-
tery and in the charging slot). Slide the battery fully forward until it touches the battery contact pins (17). If battery is inserted properly
PAGE 02
04.2 BATTERY CHARGER + LI-ION BATTERY + POWER ADAPTER
15 Battery charger
16 LED charging indicator
17 Battery contact pins +/-
18 Battery slot
19 Socket for power cable
20 Power cable
21 Li-Ion battery
22 Battery contacts +/-
23 Power adapter
24 Connector plug to RGB light
25 Socket for power adapter
10