Dometic Waeco PerfectView M9LQ Instructions De Montage Et De Service page 34

Installing the LCD monitor
7.3 Connecting the monitor electrically
The circuit diagram for the LCD monitor can be found in fig. d, page 8:
No. Description
1 Monitor
2 Monitor cable plug
3 Socket for connection cable
4 Connection cable
5 CAMERA BACK socket: Connection to BACK video source, e.g. reversing
camera
6 CAMERA RIGHT socket: Connection to RIGHT video source, e.g. side
camera
7 CAMERA LEFT socket: Connection to LEFT video source
with video signal detection, e.g. side camera
8 CAMERA FRONT socket: Connection to FRONT video source
with video signal detection, e.g. front camera
9 Cable (red): Connection to 10 – 32 V, e.g. to the positive pole of the ignition
(connected positive, terminal 15) or the positive pole of the battery (terminal
30)
10 Cable (brown): CAMERA B TRIGGER control cable for CAMERA BACK
video input,
such as for connecting the reversing light
11 Earth cable (black): Connection to earth
12 Cable (blue): CAMERA R TRIGGER control cable for CAMERA RIGHT video
input, e.g. side camera
13 Cable (white): CAMERA L TRIGGER control cable for CAMERA LEFT video
input, e.g. side camera
14 Cable (green): CAMERA F TRIGGER control cable for CAMERA FRONT
video input, e.g. front camera
15 Cable (yellow): SPLIT control cable for activating the split-screen (screen
is divided into two parts with any two cameras, e.g. side cameras on one
transport belt)
16 Socket (yellow): LIVE VIDEO OUTPUT, video output
17 Socket (white): AUDIO OUT, audio output
18 Socket (green): REC V OUT, video recorder output
19 Socket (black): AUX AUDIO INPUT, audio input 3.5 mm clip socket
34
PerfectView M9LQ
EN