Dometic Waeco PerfectView M9LQ Instructions De Montage Et De Service page 30

Technical description
6.2 Control elements
The following control elements are located on the monitor:
No. in
fig. 0, Description
page 6
1
2
3
P
4 –
5 +
6
7 M
8 S
9
10
11
12
30
Touchscreen for displaying images and operating the monitor
Sensor for IR remote control (accessory)
Switches the monitor on and off.
The button lights up red when the monitor is in standby. It lights up
green when the monitor is switched on.
1. Reduces the volume.
2. Calls up the parameters for setting.
3. Reduces the value of the selected parameter if a menu is
opened.
1. Increases the volume.
2. Calls up the parameters for setting.
3. Increases the value of the selected parameter if a menu is
opened.
1. In normal mode, switches through all the available video sources.
2. In the "Camera name" menu, skips through the positions of the
respective camera name. The marked point is highlighted in
green and can be edited.
1. Displays or hides the main menu.
2. Returns to the higher menu level.
1. In normal mode, switches back to quick selection.
2. Scrolls through the menu items in the menu.
Sensor window for the dimmer function.
The brightness of the display is automatically adapted to the ambient
light.
Loudspeaker
Groove for monitor bracket
Monitor cable plug
PerfectView M9LQ
EN