Display Settings - Kenwood KDC-X303 Mode D'emploi

AUDIO SETTINGS
• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS],
select the speaker you want to adjust:
[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]
– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting
other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
• [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than
[NONE] is selected for [REAR] of [SPEAKER SIZE].
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
28
ENGLISH
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1 Determines the center of the currently set
listening position as the reference point.
2 Measures the distances from the reference point
to the speakers.
3 Calculates the differences between the distance
of the furthest speaker (rear speaker) and other
speakers.
4 Sets the [DISTANCE] calculated in step 3 for
individual speakers.
5 Adjusts [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position

DISPLAY SETTINGS

Zone identification for color settings and brightness settings
Zone identification for brightness setting
Set the dimmer
Press and hold DISP (DIM) to turn on or off the dimmer.
• If you have set [DIMMER TIME] (page 29), it will be canceled once you
press and hold this button.