Other Settings - Kenwood KDC-X303 Mode D'emploi

RADIO

Other settings

1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
[TUNER SETTING]
Selects the searching method for S / T buttons when pressed.
[SEEK MODE]
[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset
station. ; [MANUAL]: Manually search for a station.
[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)
[MONO SET] [ON]: Improves the FM reception, but the stereo effect will be lost. ;
[OFF]: Cancels.
[NEWS SET]
(For
[ON]: The unit will temporarily switch to News Programme if available. ;
[OFF]: Cancels.
[REGIONAL] (For
[ON]: Switches to another station only in the specific region using the "AF"
control. ; [OFF]: Cancels.
[AF SET] (For
[ON]: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; [OFF]: Cancels.
.
Default: [XX]
)
)
)
[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if
available ("TI" lights up). ; [OFF]: Cancels.
[PTY SEARCH]
(For
Select the available Program Type (for Radio Broadcast Data System, see
page 32), then press S / T to start.
(For
1 Turn the volume knob to select the available Program Type (for Radio
Data System, see page 32), then press the knob.
2 Turn the volume knob to select the PTY language ([ENGLISH]/
[FRENCH]/[GERMAN]), then press the knob.
3 Press S / T to start searching.
[CLOCK]
[TIME SYNC] [ON]: Synchronizes the unit's time to the Radio Broadcast Data System/
Radio Data System station time. ; [OFF]: Cancels.
• [MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only
when the band is FM1/FM2/FM3.
• If the volume is adjusted during reception of traffic information or news
bulletin, the adjusted volume is memorized automatically. It will be applied
the next time traffic information or news bulletin is turned on.
/ / /
/ / )
)
ENGLISH
/
7