Kenwood KDC-X303 Mode D'emploi page 41

TROUBLESHOOTING
Symptom Remedy
"DISCONNECTED" USB is disconnected from the head unit. Please make sure
the device is connected properly through USB.
"CONNECTING" • Connected via USB input terminal: The device is connecting
to the head unit. Please wait.
• Connected via Bluetooth: The Bluetooth is disconnected.
Please check Bluetooth connection and make sure both the
device and unit are paired and connected.
"CHECK APP" The Spotify application is not connected properly or user is
not login. End the Spotify application and restart. Then, log
in to your Spotify account.
"CH LOCKED LOCK The selected channel is locked. Enter the correct pass code to
CODE?" unlock. (Page 16)
"CHAN UNSUB" The selected channel is unsubscribed.
Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in
Canada to subscribe. (Page 14)
"CH UNAVAIL" The selected channel is unavailable. For more
information about the SiriusXM channel lineup, visit
<www.siriusxm.com>.
"CHECK ANTENNA" Check that the antenna and its connection are in good
condition.
"CHECK TUNER" Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
"NO SIGNAL" Make sure the antenna is mounted outside the vehicle.
"SUBSCRIPTION UPDATED Your subscription is updated. Press the volume knob to
– PRESS ENTER TO continue.
CONTINUE."
Symptom Remedy
"CODE ERROR" Make sure you have entered the correct pass code.
(Page 16)
"NO CONTENT" There is insufficient content to start TuneScan.
"SCAN CANCEL" TuneScan has been aborted.
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. (Page 3)
Pairing cannot be made. • Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (Page 17)
Echo or noise is • Adjust the microphone unit's position. (Page 17)
heard during a phone • Check the [ECHO CANCEL] setting. (Page 19)
conversation.
Phone sound quality is • Reduce the distance between the unit and the Bluetooth
poor. device.
• Move the car to a place where you can get a better signal
reception.
Voice calling method is not • Use voice calling method in a more quiet environment.
successful. • Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted • Reduce the distance between the unit and the Bluetooth
or skipped during playback audio player.
of a Bluetooth audio player. • Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
unit.
37
ENGLISH