Basics; Faceplate - Kenwood KDC-X303 Mode D'emploi

BASICS

Faceplate

Display window
Volume Loading
knob slot
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*3
*1 Only for /
*2 For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
*3 For : You can also turn off the display information by pressing DISP repeatedly. (Page 34)
Lights up when
Bluetooth
connection is
established.*1
(Page 17)
How to reset
Reset the unit
within 5 seconds
after detaching the
faceplate.
On the faceplate
Press B SRC.
• Press and hold to turn off the power.*2
Turn the volume knob.
Press B SRC repeatedly.
Press DISP repeatedly. (Page 33, 34)
/ / .
Remote control (RC-406)
(supplied for
Remote sensor (Do not expose to bright
sunlight.)
Pull out the insulation sheet when
using for the first time.
/ /
with an optionally purchased remote control.
/ /
control functions are not available.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press VOL or VOL .
• Press and hold VOL to continuously increase the volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
)
: Can be remotely controlled
/ : Remote
3
ENGLISH