De Dietrich DTE1111W Guide D'installation Et D'utilisation page 32

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
2 2 / / INSTALLING YOUR APPLIANCE
Gas supplied by tank or cylinder
(butane/propane)
For your safety, you must choose from the
three following connection options:
— Connection with a rigid pipe made from
copper and with screw-on mechanical con-
nectors (G1/2 gas standard mark). Make the
connection directly to the end of the elbow fit-
ted on the appliance.
— Connection with a wavy metal hose (stain-
less steel) with screw-on mechanical con-
nectors (compliant with the NF D 36-125 stan-
dard) whose service life is unlimited (Fig. 01).
— Connection with a reinforced rubber hose
with screw-on mechanical connectors (com-
pliant with the NF D 36-112 standard) whose
service life is 10 years (Fig. 02).
A
Gasket
B
Adaptor (not provided)
C
Clamp (not provided)
Dans une installation existante, un tube sou-
ple équipé de ses colliers de serrage (confor-
me à la norme XP D 36-110) dont la durée de
vie est de 5 ans peut être utilisé. Il est néces-
saire dans ce cas d'utiliser un about sans ou-
blier de mettre en place un joint d'étanchéité
entre l'about et le coude de la table (Fig. 03).
washer from your After-Sales Service
Department.
not exceeding 25 N.m.
Fig. 01
Fig. 02
32
Tip
You can obtain the adaptor and the sealing
Warning
Screw on the adaptor with a torque
Fig. 03
A
B
C

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dte1111xDte1115x

Table des Matières