Télécharger Imprimer la page

Tenovis HSG-BASISMODUL DECT Notice D'utilisation page 30

Publicité

Les langues disponibles

Les langues disponibles

PROBLEM
Battery talktime performance is significantly degraded even after a full recharge
Possible Cause
Battery approaching
end of life
PROBLEM
Receive sounds distorted
Possible Cause
Listen volume too high
on your telephone
PROBLEM
I can hear too much background conversation, noise or sidetone.
Possible Cause
Speak volume is too high
PROBLEM
I can hear a buzz.
Possible Cause
Speak volume is too high
Incorrect Configuration Dial
setting for your telephone
The base unit is too close
to your telephone.
You have selected Long range Set the HSG-Basismodul DECT to Standard range
operation and your telephone operation.
is very sensitive to the DECT
radio signals that the
HSG-Basismodul DECT
uses to operate.
Solution
Replace with a new battery pack.
Solution
If your telephone has a receive volume control, lower
this until the distortion disappears.
Solution
Lower the Speak Volume by adjusting the transmit
volume control on the base unit.
If the volume is still too high, initiate Transmit
Override (see page 30).
Solution
Lower the Speak Volume by adjusting the transmit
volume control on the base unit.
If the volume is still too high, initiate Transmit
Override (see page 30).
Try other Configuration Dial settings on the base unit.
Move the base unit away from your telephone.
UK
28

Publicité

loading