Télécharger Imprimer la page

Tenovis HSG-BASISMODUL DECT Notice D'utilisation page 26

Publicité

Les langues disponibles

Les langues disponibles

UK
USING EXTERNAL AUDIO
To listen to the optional External Audio, press the External Audio Button (9). The External Audio
Indicator (10) is illuminated when external audio is active. Your headset is now switched to send &
receive audio to/from the external audio device rather than the telephone.
If you are engaged in a telephone call using your headset when the External Audio Button (9) is
pressed, the listen volume level from the telephone will be automatically lowered permitting you
to hear the caller in the background together with the external audio source. However the caller
will no longer be able to hear you.
When in external audio mode, listen volume control and the tone adjustments for the headset
when listening to a call can also be used to adjust the volume and tone of the external audio
source.
If you wish to make a call or pick up an incoming call whilst listening to external audio, press the
Headset Button (2) or Talk Button (19) which reverts the HSG-Basismodul DECT to Headset mode,
and allows you to proceed with the call through your headset as normal.
Note: Any adjustment to listen volume and tone when in external audio mode will also affect
the settings when listening to a subsequent call through your headset. However, the headset
speak volume adjustment described on page 21 only affects speak volume to the telephone.
The speak volume to the external audio device cannot be adjusted by the HSG-Basismodul
DECT controls.
RECHARGING THE REMOTE PACK
To recharge the remote pack, place it into the Remote Pack Charger Bay (25) in the base unit.
During charging, the Remote Pack Charge Indicator l (11) on the base unit will be illuminated.
When the remote pack is fully charged, the Remote Pack Charge Indicator I (11) on the base unit
will extinguish.
A completely depleted battery will require approximately 3 hours of charge time to
fully recharge.
24

Publicité

loading