Maytag YMEDX6STBW Guide D'utilisation page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.
Select the desired cycle
Steam models
Non-steam models
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
SENSOR DRY Cycles
You can select a different dryness level, depending on your load,
by turning the knob to dryness level.
Selecting More Dry, Normal, Energy Preferred, or Less Dry
automatically adjusts the dryness level of the fabrics at which the
dryer will shut off.
SENSOR DRY cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and dryness
setting. Less Dry removes less moisture and is used for loads
you may want to put on a hanger to complete drying.
More Dry removes more load moisture. Energy Preferred is used
for a starting point for SENSOR DRY cycles.
Steam Refresh
Reduces odors and wrinkles from small to medium-sized loads of
dry items. Dry time will automatically adjust when the load size is
sensed. Medium or High Temp Levels may be selected.
4.
Set Temperature
Select temperature by turning the knob to the desired position or
select the Sensor Dry cycle that has the temperature included in
the cycle selections. Turn the TEMPERATURE knob to change the
drying temperature setting. See "Setting the Drying Temperature".
NOTE: Not all options and settings are available with all cycles.
8
5.
Select Signal (if desired)
Turn the SIGNAL knob to select the desired setting (Off, Low, or
High). The Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
6.
Select Wrinkle Prevent or Wrinkle
Control (if desired)
Select Wrinkle Prevent or Control by turning the knob to the
desired position.
Get up to 120 minutes of no-heat, periodic tumbling at the end
of a cycle. Turn the WRINKLE PREVENT or CONTROL knob to
OFF, ON, 60 min., or 120 min. at any time before the cycle has
ended.
NOTE: Not all options and settings are available with all cycles.
7.
Press PUSH TO START to begin cycle
Push and hold the PUSH to START knob to begin the cycle.
DRYING RACK
To purchase a drying rack for your dryer, please refer to
"Assistance or Service" on the back cover of the manual or
contact the dealer from whom you purchased your dryer.
Part Number
3406839
Drying rack - fits 29" Super Capacity Plus
Accessory

Publicité

Table des Matières
loading

Table des Matières