Bosch PushDrive Notice Originale page 20

20 | English
Service
Have your power tool serviced by a qualified repair person using only identical
u
replacement parts. This will ensure that the safety of the power tool is maintained.
Safety information for screwdrivers
Use suitable detectors to determine if there are hidden supply lines or contact
u
the local utility company for assistance. Contact with electric cables can cause fire
and electric shock. Damaging gas lines can lead to explosion. Breaking water pipes
causes property damage.
Hold power tool by insulated gripping surfaces, when performing an operation
u
where the fastener may contact hidden wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
Hold the power tool securely. When tightening and loosening screws be prepared
u
for temporarily high torque reactions.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is
u
held more secure than by hand.
Always wait until the power tool has come to a complete stop before placing it
u
down. The application tool can jam and cause you to lose control of the power tool.
Protect the power tool against heat, e.g. against continuous intense
sunlight, fire, water, and moisture. There is a risk of explosion.
Before any work on the tool (e.g. maintenance, tool change etc.) as well as dur-
u
ing transport and storage, set the rotational direction switch to the middle posi-
tion. There is risk of injury from unintentionally pressing the on/off switch.
Safety instructions for chargers
This charger is not intended for use by children or
u
persons with physical, sensory or mental limita-
tions or a lack of experience or knowledge. This
charger can be used by children aged 8 or older and
by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a
person responsible for their safety supervises them
1 609 92A 48W | (07.05.2018) Bosch Power Tools