Design And Function; Transport, Packaging And Storage - WIKA 232.30.63 Mode D'emploi

3. Specifications ... 5. Transport, packaging and storage
Materials
Wetted parts:
Movement:
GB
Dial and pointer:
Case, bayonet ring: Stainless steel (with blow-out back)
Window:
For further specifications see WIKA data sheet PM 02.04 or PM 02.11 and
the order documentation.

4. Design and function

Description
Nominal size 63 mm
■
The instruments measure the pressure by means of resilient bourdon
■
tube pressure elements
The measuring characteristics are in accordance with the EN 837-1
■
standard
In addition, the enclosing and the pressurised components also meet
■
the requirements of this standard, relating to safety pressure gauges
with a solid baffle wall (code S3).
When the value exceeds or falls below the set limit, the built-in bistable
■
reed contact is switched.
Scope of delivery
Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check the pressure gauge for any damage that may have been caused by
transport. Obvious damage must be reported immediately.
10
Stainless steel
Stainless steel
Aluminium
Laminated safety glass
WIKA operating instructions model 232.3x.063 with 851 per ATEX