Télécharger Imprimer la page

LENCO BTP-200 Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4. Now you have hand free function with the Bluetooth speaker.
5. Press "
(10)" button again to hang up the call when finished. And,
6. The paused music will start to play automatically.
7. Press and hold "
call.
Tip: speak to the "MIC (3)" hole direct with distance in 30 ~ 60cm to get
the best speakerphone performance when necessary.
Notice: The calling function is on main unit only when two speakers are
connected together.
J. Redial For Last Call Function
1. To redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the "
playing will pause and switch to hand free function for redial.
3. Press the "
4. Make sure that your mobile phone has last dial call used, if not, the
redial for last call function cannot be activated.
K. AUX IN Function
1. In power ON mode, connect the Bluetooth Speaker's "AUX IN Jack (4)"
with an external device's "Earphone/AUX/LINE" Output through the
Audio cable (Supplied).
2. In Bluetooth connecting two speakers with music playing mode, when
you insert AUX in into the main unit, both units will be disconnected
from Bluetooth. When you insert AUX in into the slave unit, the main
unit is still working. When you disconnect the Aux in, you need to
reconnect these two units again.
3. The Bluetooth Speaker will switch to "AUX In" mode automatically
from Bluetooth mode, and the "Bluetooth LED (7)" indicator will
switch to long light from blinking.
4. Now the "AUX In" Function is ready, start to music play from your
external device by it control and or program, for example, Play, Stop,
volume control...etc.
5. You also can use Bluetooth Speaker control;
6. Press and hold the "
7. Press and hold the "
8. When maximum or minimum volume is reached, a series of tones will
sound.
9. Disconnect the Audio cable when it is done.
L. Low Power Reminder And Auto Sleep
(10)" button for 3 seconds to ignore the incoming
(10)" button to enter into redial function, the
(10)" button again to hang up the redial call.
(9)"button to increases the volume level.
(8)" button to decreases the volume level.
7

Publicité

loading