LENCO BTP-200 Mode D'emploi page 6

2. Or, you can choose "Disconnect" from Bluetooth paired device list on
your mobile device.
3. In this case; the Bluetooth Speaker will turn back into
"Searching/Pairing" mode in seconds, a series of tones will sound
and the "Bluetooth LED (7)" light will turn back to fast blinking from
slow in blue.
4. Now, you can process for new mobile device pair or power Off the
Bluetooth Speaker as you wanted.
F. Auto re-connect with paired device and New pairing
1. Every time you turn On the Bluetooth speaker power; it will firstly
searching for the mobile device, which has been paired previously and
still in record. The Bluetooth Speaker will re-connect this mobile device
as priority if it is in Bluetooth searching device mode.
2. If not found in some seconds, the Bluetooth Speaker then is turn into
new pairing mode internally.
3. Now you can process for new mobile device pair. (refer to item D.2~D.5
methods)
G. Switch to new pairing from connected mode
1. In Bluetooth connected mode, you can switch the Bluetooth Speaker
into Bluetooth searching mode for paring with the new device at any
time you desired;
2. Press and hold the "
the "Bluetooth LED (7)" will turn back to fast blinking light.
3. Now you can process for new mobile device pair. (refer to item D.2~D.5
methods)
H. Bluetooth Music Playing Control Function
1. In playing music, press "
resume press it again.
2. Press and hold the "
3. Press and hold the "
4. When maximum or minimum volume is reached, a series of tones will
sound.
5. Press once the "
6. Press once the "
I. Hand Free Function
1. When there is an incoming call during Bluetooth music playing mode;
2. The ringing sound will up and the playing music will pause
automatically.
3. Press " (10)" button to pick up the call if you want.
(10)" button until a series of tones sound and
(10)" button to pause the playing music. To
(9)" button to increases the volume level.
(8)" button to decreases the volume level.
(9)" button to go to next music.
(8)" button to go to previous music.
6