LENCO BTP-200 Mode D'emploi page 10

Power Source Input
Audio
I/O
Operating Temperature 0 to 40°C
This product operates at 2400 - 2483.5 MHz and is designated only to be
used inside a normal household environment. This product is suited for
this purpose within all EU countries.
Q. Guarantee
Lenco offers service and warranty in accordance with the European law,
which means that in case of repairs (both during and after the warranty
period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to
Lenco directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use,
all warranty obligations of the manufacturer will be voided.
R. Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from
the description made in this manual.
S. Disposal of the Old Device
Micro USB Port
PC's USB port Power or DC 5V, 500mA
Output Power
Frequency
Responses
Audio in link
10
2.5W (RMS) x 2 units
(at 3 Ohm)
80Hz to 20,000Hz
600~800mV RMS,
10K Ohm