Kenwood DPX-7200DAB Mode D'emploi page 124

Audioeinstellungen
[SUBWOOFER LPF] [SW LPF FRQ]
[SW LPF SLOPE]
[SW LPF PHASE] [REVERSE]
[SW LPF GAIN]
• [SUBWOOFER] von [SPEAKER SIZE] und
[SUBWOOFER SET]
wählbar, wenn
Einstellpunkte für 3-Wege-Übergang
[SPEAKER SIZE]
[TWEETER] [SMALL] [MIDDLE]
/
[MID RANGE] [8CM] [10CM]
/ /
[5×7] [6×8] [6×9]
/ /
[WOOFER] [16CM] [20CM]
/
angeschlossen)
[X ' OVER]
[TWEETER] [HPF FRQ]
[SLOPE]
[PHASE]
[GAIN]
28
DEUTSCH
[30HZ] [40HZ] [50HZ] [60HZ] [70HZ]
/ / / /
[90HZ] / [100HZ] / [120HZ] / [150HZ]
[220HZ] / [250HZ] / [THROUGH]
[–6DB] [–12DB] [–18DB] [–24DB]
/ / /
[NORMAL]
(180°)/ (0°)
[–8] [0]
bis
[SUBWOOFER LPF] von [X'OVER]
[ON]
auf gestellt ist. (Seite 26)
[LARGE]
/
[12CM] [13CM] [16CM] [17CM] [18CM]
/ / / /
[25CM] [30CM] [38CM OVER] [NONE]
/ / / /
[1KHZ] [1.6KHZ] [2.5KHZ] [4KHZ] [5KHZ]
/ / / /
[6.3KHZ] [8KHZ] [10KHZ] [12.5KHZ]
/ / /
[–6DB] / [–12DB]
[REVERSE] (180°)/ [NORMAL] (0°)
[–8] bis [0]
[80HZ] [MID RANGE]
/ /
/ [180HZ] /
ist nur
[WOOFER]
[4×6]
/ /
(nicht
• [WOOFER] von [SPEAKER SIZE]
[SUBWOOFER SET]
/
Einstellungen der digitalen Zeitanpassung
Die digitale Zeitanpassung stellt die Verzögerungszeit des Lautsprecherausgangs
ein, um eine geeignetere Umgebung für Ihr Fahrzeug zu erzeugen.
• Für die weitere Informationen, siehe "Automatische Bestimmung der
Verzögerungszeit" auf Seite 29.
[HPF FRQ] [30HZ] [40HZ] [50HZ]
/ /
[90HZ] / [100HZ] / [120HZ]
[220HZ] / [250HZ] /
[HPF SLOPE] [–6DB] [–12DB]
/
[LPF FRQ] [1KHZ] [1.6KHZ] [2.5KHZ]
/ /
[6.3KHZ] [8KHZ] [10KHZ]
/ /
[LPF SLOPE] [–6DB] [–12DB]
/
[PHASE] [REVERSE] [NORMAL]
(180°)/
[GAIN] [–8] [0]
bis
[LPF FRQ] [30HZ] [40HZ] [50HZ]
/ /
[90HZ] [100HZ] [120HZ]
/ /
[220HZ] [250HZ]
/ /
[SLOPE] [–6DB] [–12DB]
/
[PHASE] [REVERSE] [NORMAL]
(180°)/
[GAIN] [–8] bis [0]
und [WOOFER] von [X'OVER]
auf [ON] gestellt ist. (Seite 26)
[60HZ] [70HZ] [80HZ]
/ / / /
/ [150HZ] / [180HZ] /
[THROUGH]
[4KHZ] [5KHZ]
/ / /
[12.5KHZ] [THROUGH]
/ /
(0°)
[60HZ] [70HZ] [80HZ]
/ / / /
[150HZ] [180HZ]
/ / /
[THROUGH]
(0°)
ist nur wählbar, wenn