Service Notes; Technical Data - Audiotechnik Dietz 66010 Guide De L'utilisateur

12
English
3. If the green LED on the interface turn of release the reset button.
5. The green LED start flashing and show you that the Interface is rdy and found the CAN-Information.
After reset you must set the Signal for the output again.

Service notes

This unit does not need any servicing.
Do not open the housing. There are no user-serviceable parts inside.
Wipe gently with a dry cloth over the surface to clean the unit. If there is more tough dirt, first use a light wet
cloth and then uses a dry one. Never use corrosive cleaners to clean the unit.

Technical data

Power supply: 12 V DC
Working Voltage: 10,0 – 14,6 V DC
Quiescent current: 1 mA
Power consumption: 0,58 W
Temperature range: -40 - +85 °C
Weight: 0,040 kg
Dimensions: 40 x 30 x 15 mm
This unit is only for automotive use and has therefore a lifetime of max. 10 years.
®
Copyright © by Audiotechnik Dietz Vertriebs-GmbH ● Germany
Rev 2, Stand: 03 / 2013