Function Setting; Reset The Interface - Audiotechnik Dietz 66010 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Function setting

To change the output signal be sure that the interface is complete installed in the car.
Connect the cables of the Interface with the cables of the car like on the list on page 9. The LED must flash
green or glow green.
Press with the delivered plastic pen 3 seconds into the reset hole.
After the LED turn of release the pen from the reset hole.
After 2 seconds the LED flashes red and change to green flashing. Now you can change the signal of the
Interface.
To change the output signal you have to press the reset button shortly.
After each press the next step in the chart below is set. The setting will be shown as a flashing of the LED.
LED flash
1 x green
2 x green
3 x green
4 x green
5 x green
6 x green
7 x green
8 x green
9 x green
1 rot
1 x red 1 x green
1 x red 2 x green
1 x red 3 x green
1 x red 4 x green
1 x red 5 x green
1 x red 6 x green
After you set the signal you want to have you must press the reset button after the green LED turn off release
the button. The green LED turn on permanent. After that the function can be used.
If the signal you have selected ist he wrong one you must repeat the process.

Reset the Interface

1. Disconnect the interface from the cables
4. Press and hold the reset button. Reconnect the Interface with the cable
Funcion
Ignition
Light ( Positiv )
Reverse gear
Hand breack
Parksensor
Mute Fiat Blue & Me
Speed signal ( 26000 )
Speed signal ( 13000 )
Speed signal (8000 )
Speed signal ( 4000 )
Positive output while driving
Positive output while driving below 10 km/h by
entering back gear
Positive output by emergancy break also warning
indicator will be activated
Positive output below 10 km/h
Positive output while driving below 10 km/h
Positive output while driving active by reverse gear
or first ignition
Copyright © by Audiotechnik Dietz
Rev 2, Stand: 03 / 2013
®
Vertriebs-GmbH ● Germany
English
Cable output color
Pink/Orange
Pink/Orange
Pink/Orange
Pink/Orange
Pink/Orange
Pink/Orange
gray
gray
gray
gray
Pink/Orange
Pink/Orange
Pink/Orange
Pink/Orange
Pink/Orange
Pink/Orange
11

Publicité

Table des Matières
loading

Table des Matières