Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Maintenance of the grease filter
The hood contains one or 2 metal filters (according
to the model) which should be cleaned twice a
month.
Access to the filter
Take hold of the right and left side of the plate
an pull down simultaneously. Remove the filter by
taking hold of its hook and by pulling it down.
Cleaning the filter:
• in the dishwasher
• manually: in a hot solution of water and a
liquid detergent. Rince and allow to dry com-
pletely
Important! The previous instructions need to
be followed. If not an increased fire hazard may
occur.
Maintenance of the hood
Please allow the lights to cool down sufficiently
before cleaning the hood.
Use a soft, wet cloth and a mild detergent to clean
the hood.
Never use aggressive, abrasive detergents or
sponges. Bleach will damage stainless steel.
The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
Replacing the lamps
The hood needs to be disconnected from the
electric mains before proceeding.
Remove the glass plate covering the lights by
pulling down on both sides. Remove the lamp
from the socket.
874: 2 lamps of 11 Watt.
876, 877 and 878: 2 lamps of 15 W.
Electrical connection
Electrical output: electrical cord + plug with
ground. To be plugged into socket with ground.
Check for compatibility with information on type
plate (behind filter).
Socket must be within reach.
Changes or replacement of the electrical cord
should be performed by a professional only.
Dimensions: p. 17
Electrical scheme: p. 18
EN 13
Publicité
