Bosch KAD90 Série Notice D'utilisation Et De Montage page 39

3. Screw the feet in/out until the appliance is exactly
level. Use the appliance doors as a reference point.
4. If the freezer compartment door is lower:
5. If the fridge compartment door is lower:
If the appliance is exactly level but one of the doors is
lower than the other:
1. Open the appliance doors.
2. Unscrew the 3 screws holding the base panel and
remove it.
3. Undo the nut.
4. Turn the adjusting nut until the appliance doors are
aligned.
5. If the freezer compartment door is lower: Turn the
adjusting nut anti-clockwise.
6. If the fridge compartment door is lower: Turn the
adjusting nut clockwise.
7. Tighten the nut.
8. Put the base panel back in place and secure it with
the 3 screws.
en
39