Native Technology B-TWIG12PRO Notice D'emploi page 9

ASSEMBLY:
• Place the subwoofer on a level surface with no drops. (Fig. 1)
• Fasten the support element to the subwoofer by inserting the four steel guiding pins and
the two audio jacks into their respective sockets. (Fig. 2)
• Slide the lower part of the first column speaker (A) into the upper part of the support until
it locks. (Fig. 3)
• Repeat the operation to fix the second column speaker (B) with the upper part of the first
column speaker (A). (Fig. 4 - Fig. 5)
Fig 1
Fig 3
Lock A,
following arrow
direction
Click
A
Click
B-TWIG 12 PRO
16 User manual |
Fig 2
Insert the support
element, following
arrow direction
Fig 4
Lock B,
B following arrow
direction
B
A
Click
A
DISASSEMBLY:
• Press the upper column speaker (B) from the back to release it from the lower
column speaker (A). (Fig. 6)
• Repeat the same operation between the lower column (A) and the support
element. (Fig. 7)
• Remove the support from the subwoofer and store all the elements. (Fig. 8)
Fig 5
Fig 6
Unlock B, Unlock A,
following arrow following arrow
B
direction direction
Click
A A
Click Click
Fig 8
Pull the support,
following arrow
direction
B-TWIG 12 PRO
Fig 7
17 17
| User manual