Native Technology B-TWIG12PRO Notice D'emploi page 6

7
9
7 LINE INPUT L/R
Balanced line inputs with COMBO sockets (XLR-F + 6.35mm Jack); by connecting a
single cable to the L (MONO) socket, the signal is internally processed as mono. The
volume of these inputs is regulated by channel 3 knob.
8 TAPE INPUT L/R
Unbalanced line input with RCA L/R sockets. Connect to these sockets the output of a
hi-fi device (CD) or other device with RCA L/R outputs. The volume of these inputs is
controlled by channel 3 knob.
9 SUB OUT
Balanced XLR-M output to send the signal to another active subwoofer. The level is
influenced by both SUB LEVEL and MAIN knobs.
10 MIX OUT L/R - R
Balanced XLR-M output for addressing the MAIN MIX signal to another B-TWIG 12
PRO system.
The output signal is influenced by the position of the STEREO / MONO button, as
described in point 9, chapter 3.1.
Button pressed (MONO): all the signals present in input channels are internally summed
and the MIX OUT provides the signal for an additional reinforcement system.
Button raised (STEREO): the signal present in the left channel (L) of all stereo inputs
is summed and exclusively played back by the main system, while the signal in the
right channel (R) of all stereo inputs is summed and exclusively played back from the
additional system.
NOTE: The signal of the Mono inputs CH1 and CH2 is reproduced equally on the left
(main system) and on the right (additional system)
B-TWIG 12 PRO
10 User manual |
ATTENTION: To achieve a balanced and homogeneous stereo sound front,
when connecting two systems in a stereo configuration, set identically the
additional system controls (R).
11 DFX FOOTSWITCH
8
Connect to this unbalanced jack an external footswitch for activating or
bypassing internal effects. Press once to deactivate the effects and a second
10
time to reactivate them.
12 FAST ELEMENTS CONNECTION SYSTEM
This mechanism allows locking and release of the elements that make up
the system, ensuring the perfect functionality in total safety.
11
-
+
Audio contacts (+ / -)
Circular coupling and
rotation joint (male)
+
-
+
-
Steel guide
pins
Circular coupling and
rotation joint (female)
B-TWIG 12 PRO
11
| User manual