Connections - Native Technology B-TWIG12PRO Notice D'emploi

12 BLUETOOTH / AUX - LEVEL
®
This knob adjusts the volume of AUX IN STEREO and BLUETOOTH
knob to the right to raise the level, to the left to decrease it.
13 DFX PRESETS
This 16-position selector allows you to choose the desired type of effect.
For a quick reference, the list of effects is shown to the left of the selector.
The first 4 effects emulate different reverberations, characterized by reflections of the
sound inside two different ambients, the following 4 (5-8) are suggested in particular
for vocal or percussions, the stereo delays generate the classic delay effect of the main
signal, finally there are the multi-effect combinations (11-16) ideal for vocal and most
solo instruments.
14 DFX TO MAIN
This knob determines the overall signal level of the DFX effects unit for the main output.
Use the knob to increase or decrease the amount of processed signals to be send to
the MAIN LEVEL.
15 DSP - PRESET BUTTON AND LED
Press this button to select the equalization suitable for system use.
The lit LED shows the activated preset.
• DJ SOUND
Suitable for installations in disco club or a mobile DJ SET, applications where a punchy
tone is required as well as a predominance of very deep and engaging bass frequencies.
• PLAYBACK
For listening and using reproduced music sources (CD players, MP3, etc.). Low and high
frequencies are emphasized. Suitable for all those situations where the background
music is spread out, even at low volume.
• FF OPENED
This preset optimizes speech intelligibility with an accurate and balanced dynamic
response.
It's particularly suitable for spread of announcements, warnings and vocal messages,
as well as for listening and use of playback music, with both columns set far from the
main listening wavefront.
NOTE: the FF OPENED preset does not supersede a correct arrangement of the speakers,
nor it acts with different signal output delays on each individual speaker.
• LIVE SOUND
For system use in live performances. Characterized by a flat and realistic response, it
is suitable for concerts in clubs, as well as for musicians and singers.
B-TWIG 12 PRO
8 User manual |

3.2 | CONNECTIONS

inputs, turn the
®
1
2
3
4
5
6
1
2
3
HI-Z / MIC - CH1 BUTTON
This button switches channel 1 input signal impedance.
Set the button to MIC to connect a microphone or set the button to HI-Z
when you need to connect an electro-acoustic guitar. The button only acts
on the 6.35mm input jack.
HI-Z INPUT - CH1
Balanced input with 6.35mm (1/4") socket. An unbalanced cable can also
be used.
MIC INPUT - CH1
Balanced microphone input with XLR-F socket.
LINE / MIC - CH2 BUTTON
Set the button to LINE to use a line-level source or set the button to MIC to
use a microphone.
LINE INPUT - CH2
Balanced input with 6.35 mm jack. An unbalanced cable can also be used.
MIC INPUT - CH2
Balanced microphone input with XLR-F socket.
4
5
6
B-TWIG 12 PRO
9
| User manual