Installation; Description; Inputs & Controls - Native Technology B-TWIG12PRO Notice D'emploi

2 | INSTALLATION

The system is composed by the active subwoofer B-TWIG 12S PRO,
plus B-TWIG 12CS PRO kit:
A | Side recessed handle.
B | Pins system for elements quick lock and release.
C | Support element.
D | Passive array speakers, with rear recessed handles.
E | Anti-slip rubber feet.
F | Built-in fastening points for transport wheels fixing.
B-TWIG 12S PRO
A B
E
E F
A
B-TWIG 12 PRO
4 User manual |
B-TWIG 12CS PRO
D B
B
D
B
C

3 | DESCRIPTION

1
2
3
4
3.1 | INPUTS & CONTROLS
1 CH1 / CH2 - TWO-TONE SIG/CLIP LED
Green: The unit is plugged in and the power switch is turned ON.
Red: The input signal is very high and close to distortion.
If the LED is steadily lit, you need to reduce the input signal or adjust the
channel EQ by reducing the boost introduced by the HIGH and LOW gains.
2 CH1 / CH2 - DFX LEVEL
This send, affected by the level control of each single channel, allows to
adjust the signal sent to the DFX internal effects unit.
5
6
7
8
9
B-TWIG 12 PRO
5
| User manual