Table des Matières
Publicité
Connecting Up
2
Home theater audio connections
This player outputs multi-channel audio in both analog
and digital form. Check the manual for your amplifier/
receiver to see what equipment it is compatible with
(especially which digital formats—Dolby Digital, DTS,
etc.—it can decode).
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
1
If your amplifier has stereo inputs only,
connect them here.
3
Connect to the coaxial or optical input of your amplifier,
if it has digital inputs.
Connecting optical cables
Optical interconnects only plug in
one way, so make sure the plug is
correctly lined up with the jack
before inserting. You should hear it
click into position when fully
inserted.
32
En
AV CONNECTOR 2
AV CONNECTOR 1 (RGB)-TV
1
2
1
1
L
2
R
2
VIDEO
AUDIO OUT
S-VIDEO
OUT
(2CH)
OUT
2
If your amplifier has 5.1 channel analog inputs,
connect them here.
Connect to the REAR (surround) LS (left)/RS (right),
center and subwoofer inputs if your amplifier has 5.1
channel analog inputs.
CENTER
L
IN
OUT
R
OPTICAL
COAXIAL
CONTROL
SUB
FRONT
SURROUND
WOOFER
DIGITAL OUT
AUDIO OUT
(5.1CH)
4
Plug into a standard AC wall outlet.
Connecting coaxial cables
Use an interconnect with a pin-
type (also called RCA or phono)
plug on each end to connect up
digital coaxial-type jacks. Make
sure that the plug is pushed fully
home.
Connecting analog audio cables
Be sure to fully insert each plug for the best connection.
The plugs and jacks are colour-coded to make connection
easier.
AC IN
C O A X
Publicité
Table des Matières
