Table des Matières
Publicité
2 Connecting Up
Home theater audio connections
Important: Before making or changing any rear panel connec-
tions, make sure that all components are switched off and unplugged
from the wall outlet.
This player outputs multi-channel audio in digital form. Check the
manual for your amplifier/receiver to see what equipment it is
compatible with (especially which digital formats—Dolby Digital,
DTS, etc.—it can decode).
1
If your amplifier has analog inputs, connect to the left/
right inputs. Otherwise, connect to a pair of stereo inputs.
2
Connect to the coaxial or optical input of your
amplifier, if it has digital inputs.
Connecting optical cables
Before plugging in an optical cord, pull
out the protective cover from the optical
jack.
Optical interconnects only plug in one
way, so make sure the plug is correctly
lined up with the jack before inserting.
You should hear it click into position
when fully inserted.
26
En / Fr
AV CONNECTOR
525i
525p
AV1(RGB)
(480i)
(480p)
-TV
MENU
SELECT
COMPONENT VIDEO OUT
AV2
CONTROL
DIGITAL OUT
TV SYSTEM
2
OUT
IN
NTSC
PAL
AUTO
1
OPT
COAX
3
Y
P
P
B
R
1
2
1
S-VIDEO OUT
VIDEO OUT
AUDIO OUT
R
L
2
1
Connnecting coaxial cables
Use an interconnect with a pin-type
(also called RCA or phono) plug on
O P T
each end to connect up digital coaxial-
type jacks. Make sure that the plug is
pushed fully home.
Connecting analog audio cables
Be sure to fully insert each plug for the best connection. The plugs
and jacks are colour-coded to make connection easier.
Plug into a standard AC wall
outlet.
2
AC IN
C O A X
Publicité
Table des Matières
