Toshiba RAS-M10SMUV-E Manuel Du Propriétaire page 20

Masquer les pouces Voir aussi pour RAS-M10SMUV-E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Combined timer (Setting both ON and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air conditioner after you go to sleep or away from home and to start it again in the
morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next morning.
Setting the combined TIMER
(1) Push the OFF
button.
(2) Push the TIMER
button to adjust the OFF timer.
(3) Push the ON
button.
(4) Push the TIMER
button to adjust the ON timer.
(5) Push the SET
button.
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner when you wake up and stop it when you leave the house.
Example:
To start the air conditioner next morning and stop the operation.
Setting combined TIMER
(1) Push the ON
button.
(2) Push the TIMER
button to adjust the ON timer.
(3) Push the OFF
button.
(4) Push the TIMER
button to adjust the OFF timer.
(5) Push the SET
button.
• Either ON or OFF timer function which ever is the closest to the current time is activated first.
• If the same time is set for both the ON and OFF timers, no timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer
(Setting both ON and OFF timer simultaneously and activate every day.)
This feature is useful when you want to use the combined timers at the same time every day.
Setting combined TIMER
(1) Push the ON
button.
(2) Push the TIMER
button to adjust the ON timer.
(3) Push the OFF
button.
(4) Push the TIMER
button to adjust the OFF timer.
(5) Push the SET
button.
(6) After step 5), an arrow mark (
push the SET
button.
• When the every day timer is activated, both arrows ( ,
Cancel the timer operation
Push the CLR
button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF timer) the clock display is not
displayed therefore not showing the setting time.
To see the present time, push SET button briefly.
The present time is displayed for about 3 seconds.
EN
or
) flashes for about 3 seconds, whilst flashing,
) are displayed.
Operation
Stop
14
Operation again
Stop
Operation
Stop

Publicité

Table des Matières
loading

Table des Matières