Machine-Specific Safety Warnings - Elem Garden Technic Det2000 Traduction Des Instructions D'origine

MACHINE-SPECIFIC SAFETY
WARNINGS
When using electric tools,
basic safety precautions
followed to reduce the risk of
fire, electric shock and
personal injury. Read
all these instructions before
attempting to operate this
Before using the appliance
Check the following:
▪
Make sure the voltage of the tool corresponds
▪
with the power voltage;
Are the mains lead and the mains plug in a good
▪
state: strong, without ravels or damages.
Caution is advised when using long extension
▪
cables
Do not use the appliance under moist
▪
circumstances;
The metal mouthpiece gets hot. Watch out and
▪
do not touch the metal mouthpiece;
Prevent damage of the heating element. Do not
▪
lock or block the mouth piece or the ventilation
openings;
Do not leave the appliance when switched on;
▪
When in operation do not point the device at
▪
people or animals
Never look into the hot air nozzle
▪
Do not use this device in rain or damp
▪
surroundings, or near explosive or flammable
products.
Do not use the device on or near very dry spots
▪
to avoid fire
Always remove the plug from the socket when
▪
not using the device, when replacing the
nozzles or during maintenance of the device
Do not point the device at the same place for
▪
longer periods of time
Do not hold the device too close to the surface
▪
about to be worked on as the device can
overheat
Pay attention to the direct / indirect workspace
▪
as the heat can ignite flammable materials,
which are close by but not necessarily in view
Do not allow the hot parts of the device to touch
▪
the cord or other flammable materials
The device should always be clean, dry and free
▪
of grease and oil
Do not use the appliance for purposes other
▪
than for which it is intended.
should always be
product and save
these instructions.
This appliance operates at a
temperature of 600 degrees
signs of this temperature (no
flames), still there is a chance
Watch out for the hot air stream
from the mouth piece. This air
stream can cause burns.
WHEN OPERATING THE
APPLIANCE
If you are going to use the tool, vapours and gas
▪
can be released during a short time. This can be
harmful for your health. Asthmatics can suffer
hindrance of it;
Before connecting the plug to the mains voltage
▪
you have to check if the switch is in position "0";
Keep the mains lead always away from the
▪
mouthpiece of the tool;
Keep children and animals away from the
▪
appliance if you are using it.
Keep all parts of the body away from the metal
▪
heating head (incl. the nozzle). Do not touch it
before it is cooled down. Carry the appliance always
and only by the insulated handle, because the
burner may come in contact with hidden wiring or its
own electrical cable.
without visible
of fire risk.